Technical Specifications

Product Introduction

The PoE Splitter Adapter with DC Output is designed to convert 48V PoE input into stable DC power output (5V, 9V, or 12V) while extracting data through RJ45. It allows non-PoE devices to be powered using existing PoE infrastructure, reducing cable clutter and enabling flexible placement of edge devices like IP Cameras, Wireless APs, and single-board computers.

Ideal for applications where devices require specific low-voltage DC input but operate in PoE-enabled networks.

Key Specs at a Glance

• Input: 24V or 48V

• Output: DC 5V /24V / 12V @ Max 2A

• Data: 10/100Mbps or Gigabit

• Connectors: RJ45 + 5.5mm DC Barrel Plug

• Compatibility: IEEE 802.3af / 802.3at

Product Features

• Converts PoE 48V to low-voltage DC output (5V/9V/12V)

• Supplies power and data over one Ethernet cable

• Ideal for powering non-PoE devices through PoE network

• Built-in voltage regulation and overcurrent protection

• Lightweight, compact, and plug-and-play

Compatible Devices

• Non-PoE IP Cameras

• Raspberry Pi / Jetson Nano / SBC Boards

• Wireless Access Points

• Industrial IoT Sensors and Microcontrollers

• Network Printers / Media Players

Ensure your PoE switch or injector supports IEEE 802.3af/at
Match output voltage to device input requirements
Use Cat5e or higher-rated cables for optimal results

Safety & Usage Notes

• Not intended for use with passive PoE if configured for active

• Use only with regulated PoE power sources

• Ensure proper polarity when using DC power plug

• Keep away from moisture and direct sunlight

Frequently Asked Questions (FAQ)